MANUAL BALANCING VALVES

Imperial Flange and Fitting

sales@imperialco.net   P.O. Box 352262  Los Angeles, California 90035 (USA)

To:  Imperial home page   Venturis    Nozzles   TA 2% Flow Tubes     Flow Tubes    Orifice Flanges   Orifice Plates/RTJ Plate Holders  Orifice Fittings   Multistage Orifice Assemblies   Automatic Accessible Flow Controls   Manual Balancing Valves   Manifold Valve Series  Condensate Chambers/Straightening Vanes/Bleed Rings/Spectacle Blinds/Spool Pieces    Restriction Orifice Unions   Pitot Tubes  Grounding RIngs   Strainers    sales@imperialco.net     

Griswold Controls' QuickSetTM Manual Balancing Valves are venturi style, manual balancing valves in sizes from 1/2" to 18". QuickSetTM Manual Balancing Valves sizes 1/2" to 2", are union ball valves equipped with a venturi, graduated memory stop, and Flow Optimizer. The Flow Optimizer greatly improves overall valve performance and makes static balancing simple and quick. Griswold Controls' QuickSetTM Manual Balancing Valves in 2-1/2" to 18", are steel, low loss venturi measuring stations with Quadrant Piezo-Ring. The design feature allows for the valve to be install after a elbow, temperature control, or other valve, without affecting flow. For 2-1/2" to 18" sizes, end connections are Flanged, Weld, or Grooved End options.

Sizes 1/2" - 2" QuickSet™
Manual Balancing Valves
F-4006

QuickSet Manual Balancing Valve

 

The Flow Optimizer is a durable plastic insert that is pressed into the discharge end of the ball. The parabolic shape of the Flow Optimizer modifies valve characteristics in such a way that the valve setting becomes simple and quick. With ordinary type balance valves, the throttle characteristics of the valve are such that from full open to 20% closed, ball valves do not control flow; instead, the ball valve and flow passage is literally wide open. From 70% to 100% closed, throttling is extremely sensitive and difficult. The operator must manipulate the valve handle repetitively to achieve the desired set point.

Specification Sheet     Flow Rate Graph
Installation & Operation Guidelines     Performance Specifications

Grooved End QuickSet™
Manual Balancing Valve /
Metering Station

QuickSet Manual Balancing Valve

 

F-4406 Weld End QuickSet™ Specifications

F-4407 Flanged End QuickSet™ Specifications

F-4408 Grooved End QuickSet™ Specifications

Grooved End QuickSet™ Manual
Balancing Valve / Metering Station
with Accessory Ports

QuickSet Manual Balancing Valve

 

F-4087 Weld End QuickSet™ with Accessory Ports Specifications

F-4088 Flanged End QuickSet™ with Accessory Ports Specifications

F-4089 Grooved End QuickSet™ with Accessory Ports Specifications 

         F-4218 Electronic Flow Transducer